All About Roofers Gazette Digital

How to fix a leaky roof from inside?

Feb 28

How to fix a leaky roof from inside?


When it snows or rains, water stains are suddenly visible on the ceiling. Water is seen trickling down the walls and forming small pools of water on the floor. Because of all the activity inside the house, the roof quickly becomes a mess. These are the steps to fix leaky roofing from the inside. roofing in Mesa AZ spotted them all.


Step-by-Step Roof Repairs

These procedures are only temporary. Professional repair or replacement of a roof that is leaking is the best long-term solution. The main purpose of the roof is to protect your home from severe weather. These elements can cause roof damage and wear. A professional will be required to create a cohesive design. Let's get the party started!


Step 1: Get up to the attic.

  • For a leaky roof to be repaired, you will need to locate the attic of your house and go into it. If the covering is made of plastic, it should be placed between the attic insulation & the wall.

  • Remove the insulation from the sides and drain any excess water. To drain the water, place a little piece of wood above the ceiling joists.

  • If your roof is already wet you will need to puncture it. Once the bucket is underneath the roof, let the waterfall flow freely into the bucket. It is possible that the ceiling will need to be repaired later.

Step 2 - Finding the Leak

  • It is crucial to identify the source of any roof leaks. The size of the hole must be accurately determined. If you don't, these steps will be repeated.

  • It is important to watch where it enters your roof. Sometimes it can travel quite a distance from the spot where it is entering the ceiling. It is possible to follow the water's movement along a beam. It is worth noting, however, that water can sometimes follow the roof deck's base.

  • Once you've repaired the damage, you can go up to the attic. You should not step on anything that isn’t supported. Then, with a flashlight, locate the affected area, and trace it back to where it entered your roof.

  • It can sometimes be difficult to locate a minor leak. If the water flow lines are not visible and the stain appears to be small, you should inspect the roof for any single nails that may have escaped from the roof support.

  • Moisture from the lower rooms sometimes leaks into the attic. Here it condenses on the nails of the cold. You can identify this shiner by climbing into your attic on cold nights.

  • They will turn white because moisture is settling onto the nails. The frost on the pin will melt as the attic heats up later in the day. It is possible to remove the nail using pliers.

Step 3: Create a repair

  • To create a temporary leak, use a roofing patch, plywood, and tar. You will need a utility knife to apply the roofing glue to the roof deck.

  • Attach the plywood or the shingle to the roofing tar. Be sure to add enough asphalt around the edges of the leaking area. This is to ensure that it is more stable and secure.


Step 4 - Calculate the total distance from the leak.

  • While still in the attic, measure the entire distance of the hole and its extent from the roof and ridge. By doing this, you make it much easier to find the leak in the attic after the rains have stopped.

  • After the rains have stopped, you will be able to return to your roof, measure the exact dimensions and then secure the base with roofing tar.



Mesa Roofing Pros

930 N Mesa Dr #2001 Mesa 85201